CHOOSE THE PRESS AROUND THE JOB.
Stack Type Flexo
Press Buying Guide
A stack flexo press has vertically arranged printing units, each with its own impression roller. Choose around your material, artwork, ink and daily production needs, then compare the equipment actually included.
Start with the printed job.
Bring the material specification and artwork. Define the print width, repeat length, ink separations and colors needed on each face.
Compare a complete offer.
Review the anilox specification, drive and registration controls, drying, roll changes and job-change routine before comparing usable output and cost.
01 / STACK PRESS SELECTION
Choose the features your production needs.
Use these seven checks to prepare an inquiry and assess the proposed stack press with your material and artwork.
Hover or click a factor below
01 / 07
Will the press handle your material and artwork size?
Start with the roll material, its thickness or weight, and the complete printed layout. A machine listed for film is not automatically suitable for every film grade.
Define the material range
For film, give the grade, layers, thickness and surface treatment. For paper or nonwoven, give the weight per square meter and printable side. Include your most difficult material in the trial.
Check both widths and the repeat
Roll width is the full material width; print width is the usable printed area. Repeat length is the length of one repeated design along the material. Send the minimum and maximum sizes your jobs require.
WHAT TO PREPARE
- A sample roll and an artwork layout with edge or trim allowances
- Material range, incoming roll width, usable print width and repeat lengths
Check the smallest job as well as the largest. The quotation should state which widths and repeats the proposed machine and tools support.
02 / 07
How many stations and print faces do you need?
Count each ink separation in the artwork, including white ink and separately mixed brand colors. Then state the colors needed on the front and back.
Compare four, six or eight stations
Choose around your current and planned artwork. Cyan, magenta, yellow and black are the four process inks, often called CMYK. Adding white and a separate brand color can make six separations in one example.
Specify colors on each face
A six-station press does not automatically print six colors on both sides. For a four-front plus two-back job, ask whether the machine can support that route and whether one or two passes are needed.
WHAT TO PREPARE
- Artwork showing the ink separations and colors required per face
- The proposed material route and front-to-back alignment target
Color count describes the stations offered, not a guaranteed two-sided arrangement. Extra stations also need space, tooling and a clear production purpose.
03 / 07
Which anilox specification matches your print?
The anilox roller meters ink to the printing plate. RAZP lists metal- and ceramic-anilox stack presses; the roller material is only one part of that choice.
Review the metal-anilox proposal
Ask for the exact surface, engraving and supplied roller set. Use your artwork to check solid areas, text and ink coverage. Compare the quoted equipment and replacement-roll requirements.
Review the ceramic-anilox proposal
Ask which engraving is proposed for your ink and artwork. Line screen describes how closely the ink-carrying cells are spaced; cell volume describes their capacity per area. These must be considered together.
WHAT TO PREPARE
- Roll surface, line screen, cell volume, cell shape and the units used
- Sample print results, cleaning method and the cost of additional rollers
Metal and ceramic labels alone do not establish print quality, service life or a fixed price gap. Ask for the roller specification and test the same artwork and ink.
04 / 07
How will the press keep the colors aligned?
Registration means color-to-color alignment. In a stack layout, the material moves between separate printing units, so tension control and station synchronization matter.
Separate drive from adjustment
Ask how the printing units are driven and how color alignment is adjusted. Manual, electric and automatic adjustment are different functions; a touchscreen alone does not explain which ones are included.
See the controls working
Use the actual material during a demonstration. Check startup, steady speed and speed changes. Watch the operator correct alignment and change between jobs, including access to the upper printing units.
WHAT TO PREPARE
- An equipment list naming the drive, tension and registration controls
- A sample print checked against an agreed alignment limit
Stack describes the unit arrangement. It does not establish that the press is fully servo-driven or has automatic registration; confirm the quoted functions.
05 / 07
What usable output will the press deliver?
Compare printed meters that meet your requirements after setup waste, cleaning and roll changes. Mechanical speed and usable printing speed are separate figures.
Use a representative production job
Give typical order lengths, changes per shift, material width and ink coverage. Fine detail and heavy ink coverage may place different demands on the printing and drying system.
Check the full drying arrangement
Specify the ink type and check drying between colors and after the final color. At the intended running speed, inspect color alignment, ink drying and finished-roll quality.
WHAT TO PREPARE
- The same material, artwork, ink and quality target in the print trial
- Usable output, setup waste, drying results and roll-change time
The ink system is model-specific. Do not assume every listed press supports every ink type, or estimate shift output from the headline maximum speed alone.
06 / 07
What does the unwind and rewind system actually do?
Define incoming and finished roll sizes, weight and core dimensions. Loading a roll, holding a spare roll and changing rolls during production are separate functions.
Clarify the dual-roll arrangement
Ask which roll runs, which waits and how each is loaded. A dual unwind or rewind arrangement does not by itself prove automatic splicing or continuous printing during a roll change.
Check changes and winding quality
Request the full sequence at both ends of the machine, including cutting, joining, transfer and removal. Then inspect tension, roll edges, tightness and the required winding direction.
WHAT TO PREPARE
- Roll diameter, weight, core size, loading equipment and change sequence
- What stops during a change and which actions are manual or automatic
Two roll positions do not mean two rolls are printed simultaneously. Write down the proposed operating sequence instead of relying on the word “dual.”
07 / 07
Can the team operate and support the press?
Compare the complete purchase and the work needed to run it. Cleaning, access, tool changes and support affect daily production as well as the quoted machine price.
Demonstrate operation and a full changeover
Check access to upper stations, plate and anilox handling, and ink-system cleaning. Measure from the last acceptable print of one job to the first acceptable print of the next.
Agree the trial and installation scope
A factory acceptance test (FAT) is a machine check before shipment using agreed conditions. Record the results and include layout, utilities, installation, training, spare parts and service responsibilities in the proposal.
WHAT TO PREPARE
- A representative print trial and a timed change between two jobs
- Included tools, options, maintenance needs and the full installation cost
Compare suppliers using the same requirements and test conditions. Low purchase price alone does not explain the cost of producing an acceptable printed job.
Selection principleCompare the material, artwork, accepted print quality and equipment scope before choosing a model or speed class.
Turn your job requirements into a stack press proposal.
Share your material, artwork, colors and output needs to discuss a suitable configuration.
02 / METAL & CERAMIC ANILOX
Compare the complete anilox specification.
RAZP lists both options. Request the details below for each proposal rather than selecting from the surface label alone.
| Item to compare | What to request | Why it matters |
|---|---|---|
| Surface and construction | The exact metal surface or ceramic coating and the engraving supplied | The general material name does not define the complete roller. |
| Line screen | The number or spacing of ink-carrying cells, with the stated units | Review it with the cell volume and the printed detail. |
| Cell volume | The capacity of the engraved cells per area, with the stated units | It affects the ink available to transfer; more is not always better. |
| Artwork and ink | Samples with the intended plate, ink, material and coverage | The roller must suit the job, including text, images and solid areas. |
| Cleaning and condition | The cleaning method, inspection routine and replacement or refurbishment plan | Contamination and roller condition can affect the print result. |
| Included roller set | The rollers supplied, extra rollers needed and the complete quotation scope | Compare the equipment needed for the same range of jobs. |
Not sure which anilox set your jobs need?
Send sample artwork and ink details so the proposed rollers can be discussed around your actual print requirements.
03 / EXPLORE RAZP STACK PRESSES
Compare configurations for your printing jobs.
Use the product pages as starting points. Request the current machine specification, included options and print-trial conditions for the configuration offered.
Metal-anilox stack press
Discuss the metal-anilox specification and the named dual unwind / rewind arrangement. Ask for the actual loading and roll-change sequence.
View this stack pressCeramic-anilox stack press
Compare the proposed engraving, color stations, controls and drying with your artwork. Include operator access and job changes in the demonstration.
View this stack pressAdditional ceramic-anilox configuration
Review this alternative against the same material, print quality and output targets. Request an itemized equipment list and an actual printing-speed trial.
View this stack press04 / PREPARE YOUR INQUIRY
Tell us what your next stack press needs to do.
Share a material specification, sample artwork and production target. RAZP can discuss the machine, anilox and roll-handling equipment to include in your quotation.
Request a Stack Press Quote- 01Material, thickness and print dimensions
- 02Artwork, ink separations and colors per face
- 03Ink type, coverage and print-quality target
- 04Typical order lengths and usable output
- 05Roll sizes, loading and change requirements
- 06Trial jobs, factory needs and budget
05 / BUYER QUESTIONS
Questions before choosing a stack flexo press
Can a stack flexo press print plastic film?
Yes, a suitable configuration can print film. Give the actual grade, thickness, surface treatment and artwork. Check tension control, drying and color alignment on the proposed machine rather than assuming all films behave the same way.
Should I choose metal or ceramic anilox rollers?
Ask for the complete roller specification and test the same ink and artwork. Compare the surface, engraving, line screen, cell volume, cleaning and supplied roller set. The words metal and ceramic do not establish a fixed quality, life or price difference.
How do I choose four, six or eight colors?
Count each ink separation in your actual jobs, including white and spot colors. Then state the colors needed on each face. The proposed machine route and number of passes must support that job; station count alone does not establish two-sided capability.
Does dual unwind / rewind mean non-stop printing?
No. Two roll positions do not establish automatic splicing, cutting or transfer. Ask what the operator does, whether the press stops and how a change works at both ends of the machine. It also does not mean two rolls are being printed simultaneously.
Does a stack press always have manual registration?
No single adjustment system defines the entire layout. Ask which drive and registration controls are included in the exact quotation. Check whether alignment is adjusted manually, electrically or automatically and demonstrate the result with your material.
Can a stack press print both sides in one pass?
Some configurations can. State the colors needed on each face and the front-to-back alignment requirement. Ask the supplier to show the material route and the station allocation for the actual machine offered.
Which speed should I use when comparing machines?
Use the printing speed supported by the material, ink, artwork, drying and finished-roll result. Record usable output after setup and roll changes. A headline or mechanical maximum is not a tested output figure for your job.
Have a question about your stack press requirements?
Ask about anilox options, print sides, drying or roll changes before requesting a detailed proposal.
Technical references & product information
- Harper Corporation — Anilox Line Screen · Relationship between line screen, cell volume and the printing job.
- Apex International — Anilox Rolls · Roller-surface and engraving options.
- FTA — Flexible Packaging and Stack Press Configurations · Examples of configuration-dependent film and two-sided capability.
- RAZP — Stack Type Flexo Printing Machines · Product family.
- <
