COMPARE THE LAYOUT. PLAN THE INVESTMENT.
CI vs Stack Type
Flexo Press
Start with the material you print, the quality you need and your typical orders. Compare CI and stack presses, then discuss a suitable machine with RAZP.
When to evaluate CI first
Start with CI when thin film stretches easily and the printed colors must line up closely. Test your material and artwork on the proposed machine.
When to evaluate stack first
For bag printing with simpler graphics, compare a stack press against your required quality, output and budget. For two-sided work, check the proposed printing route.
01 / INTERACTIVE COMPARISON
Find the differences that affect your production.
Select a factor to see how the layouts differ and what to check before asking for a quotation.
Hover or click a factor below
01 / 07
What is the structural difference?
A web is a continuous roll of film, paper or fabric. The main difference is how the press supports it while each color is printed.
One shared impression drum
CI means central impression. The material stays against a shared drum as it passes the color stations. This helps limit movement between colors.
A separate support at each station
The printing units are arranged vertically. Each has its own impression roller, which supports the material against the printing plate.
WHAT TO CHECK
- The material path and access to each printing unit
- The drive system, tension controls and drying equipment included
CI and stack describe the layout. The drive system and automatic features are separate parts of the equipment specification.
02 / 07
Which press suits the material you print?
Start with the material type, thickness and surface treatment. For paper and nonwoven, also provide the material weight per square meter.
Shared support for stretch-sensitive film
When thin film stretches easily and the colors must align closely, CI is a useful starting point. Test the actual film and artwork on the proposed press.
Film printing depends on the web controls
Stack presses can also print film. The tension controls and drive system must keep your material stable at the required printing speed.
WHAT TO CHECK
- A sample roll and the material specification
- The printable side, ink type and drying requirements
Printing the same sample artwork on your material is more useful than choosing from a material name alone.
03 / 07
How closely must the printed colors line up?
Registration means color-to-color alignment. Small shifts may be visible in fine text, outlines or multicolor images.
Shared support between colors
The common drum helps limit material movement from one color to the next. The drive, printing settings and material condition also affect the result.
Control between separate stations
Tension control and station synchronization affect alignment between colors. Check whether adjustment is manual, electric or automatic on the proposed machine.
WHAT TO CHECK
- The permitted color-to-color shift and how it will be measured
- Print results at startup, steady speed and speed changes
Either layout can produce good print results with a suitable configuration. Judge the proposed machine using a sample print and an agreed quality target.
04 / 07
How much usable material can you print per shift?
Count the printed meters that meet your quality requirements after setup waste, rejected print and roll changes.
Check the complete production line
Match the printing section with between-color drying, final drying and roll handling. Cooling may also be needed for the material and process.
Separate printing speed from mechanical speed
A machine may move material faster than it can print and dry your job acceptably. Check ink drying, color alignment and finished-roll quality during the trial.
WHAT TO CHECK
- The same material, artwork, ink, width and ink coverage for both trials
- Usable printed meters, setup waste and roll-change time
Water-based and solvent-based inks need compatible drying and exhaust systems. Ask for a trial at the intended printing speed.
05 / 07
How long does a complete job change take?
For frequent short orders, cleaning, tool changes and setup waste can strongly affect the amount you produce each day.
Check access around the common drum
See how plates or sleeves are changed and how the ink system is cleaned. Ask which settings can be saved and which adjustments are automatic.
Check access to every printing unit
Watch plate and anilox changes at the upper and lower stations. An anilox roller controls how much ink reaches the printing plate.
WHAT TO CHECK
- A full change between two jobs similar to your orders
- Operators required, cleaning time and material used before the first acceptable print
Measure from the last acceptable print of the old job to the first acceptable print of the next job, using the same start and finish points for both presses.
06 / 07
Do you need printing on one side or both?
State the colors needed on each face, the required front-to-back alignment and the winding direction of the finished roll.
The common-drum section normally prints one face
For a second printed face, a CI-based line needs a proposed production route, such as an added printing section or another pass through the press.
Some layouts can print both faces
Selected stack configurations can print both sides. Ask how many color stations are assigned to each face and whether the job runs in one pass.
WHAT TO CHECK
- For example, 4 colors on the front and 2 on the back—not an assumed requirement
- The proposed one-pass or two-pass route and front-to-back alignment
The illustration shows the required finished material, not a web-turning mechanism. Ask for a machine drawing that explains how the proposed press prints each face.
07 / 07
What will the complete investment include?
Compare the purchase price and the costs of installing, running and maintaining the press for your typical orders.
Match the options to your production needs
Ask what each drive, control, drying or roll-handling option adds to the job. Include the tools, installation and support needed to operate the press.
Compare what is included in the price
If a stack quotation is lower, check that it includes the equipment and labor needed for the same print-quality and output target.
WHAT TO CHECK
- Machine and options, utilities, installation space and consumables
- Training, maintenance, spare parts and service responsibilities
There is no fixed price gap between the two layouts. Width, color count, automation, drying and the equipment included in the quotation all affect the total.
Selection principleUse the same material, artwork, print-quality target and equipment scope when comparing quotations and print trials.
Which layout fits your printing jobs?
Share your material, artwork and output target to discuss a suitable CI or stack press.
02 / SIDE-BY-SIDE
CI vs stack at a glance
Use the overview to narrow your choices. The final comparison should use the machines and equipment actually offered.
| Decision factor | CI flexo press | Stack-type flexo press |
|---|---|---|
| Basic structure | Color stations share one central impression drum. | Printing units are stacked vertically, each with its own impression roller. |
| Material handling | Shared support is useful when film stretches easily. Test the actual material. | Tension controls must keep the material stable between separate printing units. |
| Color alignment | Shared drum support helps limit movement between colors. | Alignment depends on tension control, station synchronization and adjustment. |
| Usable output | Compare print quality, drying and roll handling at the required running speed. | Use the same job; distinguish usable printing speed from mechanical speed. |
| Printing both sides | The common-drum section normally prints one face; a second face needs an agreed production route. | Selected configurations can print both faces; check the colors per side and number of passes. |
| Job changes | Check tool changes, ink-system cleaning and access around the common drum. | Check tool changes, ink-system cleaning and access to upper printing units. |
| Total investment | Include the press, options, installation and operating costs. | Compare the same equipment scope, quality target and operating costs. |
03 / START WITH YOUR JOBS
Which situation looks like your business?
FILM PACKAGING
Fine multicolor printing on film that stretches easily
Your customer needs colors to line up closely across the roll. Use the thinnest or most difficult material you expect to print in the trial.
Start with a CI proposal, then check it with a print trial.
BAG PRINTING
Simpler bag graphics and a defined budget
You know the required quality, width and colors. Check whether a stack press meets those jobs within your budget, including the required dryers and roll handling.
Compare a stack proposal using the same quality and usable-output targets.
MIXED OR TWO-SIDED JOBS
Several materials, frequent changes or two print faces
List the colors needed on each face and your common job changes. Include the print repeat length—the length of one repeated design along the material.
Ask for both layouts when the best production route is unclear.
Match the press to your material.
Tell us what you print and the quality you need. We can discuss the equipment to include in your proposal.
04 / EXPLORE RAZP PRESSES
Explore CI and stack presses for your printing jobs.
Browse the product families, then discuss the material, print width, colors, ink and roll handling needed for your orders.
CI flexographic presses
CI presses are available for different film, paper and nonwoven jobs. Each machine needs the right material-handling and drying equipment for the application.
View an example pressExplore CI press configurations
- Water-based CI press for packaging
- CI press for napkin and tissue printing
- CI press for plastic film
- CI press for paper
- CI press for nonwoven materials
- Water-based CI press with electric register adjustment
- CI press with friction-based winding
- CI press with non-stop turret rewinder
- CI press with center-driven winding and automatic loading
- CI press with centralized roll handling and automatic loading
- CI press for four-color water-based jobs
- Full-servo CI press for film packaging
Stack-type flexographic presses
Compare stack presses for your packaging jobs. Check the ink-metering rollers, drive, tension controls, colors per side and roll-handling equipment.
View an example press05 / GET A CONFIGURATION PROPOSAL
Tell us what you need to print.
Send your material details, sample artwork and production target. RAZP can discuss a suitable CI or stack press and the equipment to include in your quotation.
Request a press configuration- 01Material type & thickness
- 02Roll width & printed area width
- 03Colors per side & design repeat length
- 04Ink type & sample artwork
- 05Typical order length & usable output target
- 06Roll size, site conditions & budget
06 / BUYER QUESTIONS
Questions before you shortlist a press
Is CI always better than a stack flexo press?
No. CI is worth considering for film that stretches easily and jobs that need close color alignment. A suitable stack press may meet other printing and budget needs. Compare the actual machines with your material and artwork.
Can a stack flexo press print plastic film?
Yes, if the machine is equipped for your film. Check material type and thickness, tension control, drying and color alignment during a print trial. Film suitability is specific to the machine offered.
Does CI mean gearless or full servo?
No. CI describes the shared-drum layout. Gearless or full-servo describes the drive system. Ask which drive and automatic controls are included in the quotation.
Which layout is better for two-sided printing?
Some stack presses can be equipped to print both sides. A CI-based line may need an added printing section or another pass. State the colors needed on each face and ask the supplier to show the proposed production route.
Should I compare presses by maximum speed?
Use maximum speed as one reference, then compare usable printed meters, drying, setup waste and roll-change time on the same job. Mechanical speed does not prove the press can print your job acceptably at that speed.
What should I send for a CI vs stack recommendation?
Send the material type and thickness, roll and print widths, colors per side, design repeat length, ink and artwork. Include typical order lengths, output needs, roll diameters, factory utilities and budget.
Have a question before choosing a press?
Ask about materials, print quality or the differences between the configurations you are considering.
Technical references & product information
- FTA — Flexography: Principles and Practices glossary · Common-drum definition.
- US EPA — Printing and publishing industry profile · Press configuration definitions.
- FTA — Central Impression Press Buyer’s Guide · Configuration and productivity considerations.
- FTA — Flexible Packaging and Stack Press Configurations · Examples of configuration-dependent film and two-sided capability.
- RAZP — CI & stack flexographic press range · Product families and individual configuration pages.
The illustrations explain the buying questions. Use the supplier’s machine drawing, current quotation and print trial to check the final equipment and performance.
