PRESS SELECTION, QUOTATIONS & SUPPORT

Buyer FAQs
Before You Buy

Find plain-English answers to common flexo equipment buying questions. Start with your material and required finished output, then clarify the configuration, trial and support scope.

Clear answers for the next buying step.BUYER FAQsClear answers for the next buying step.01CHOOSE THE EQUIPMENTMaterial · layout · printing and finishing02COMPARE THE PROPOSALIncluded tools · output conditions · price scope03AGREE THE HANDOVERTrial · delivery · training and supportBuyer guidance, not engineering dimensions or measured performance.
Practical buying guidance. Confirm the actual configuration and operating conditions for your project.

Need a detailed buying guide?

Use the guide library to compare press types or work through CI, stack and label requirements.

Explore all buying guides

Need a term explained?

Look up the words used in machine specifications and supplier proposals, with a practical buyer check.

Open the Flexo Glossary

Need help defining the machine requirements?

Share the material, print dimensions, colors and finished product you need to supply.

Discuss My Equipment Requirements

01 / BUYER QUESTIONS

Search by question or choose a topic.

Try a phrase such as print width, die-cutting, FAT or warranty.

24 of 24 questions shown
Do I need a machine model before contacting RAZP?PRESS SELECTION

No. Start with your material, artwork dimensions, color count, typical orders and required finished output. Add the production problem you want to solve. A model and configuration can be discussed once the requirements are clearer.

How should I compare CI and stack flexo presses?PRESS SELECTION

CI printing stations work around a shared impression drum; stack presses use vertically arranged units with separate impression supports. Compare the proposed configuration using your material, print-quality requirements, job changes, roll handling and investment scope. Neither layout alone describes every control or accessory.

Does CI mean the machine is gearless or fully servo-driven?PRESS SELECTION

No. CI describes the printing layout. Ask how the proposed machine is driven, which parts have separate drives, how color alignment is adjusted and which automatic functions are included. Use the actual equipment specification.

Can one press handle every film, paper and nonwoven job?PRESS SELECTION

Compatibility depends on the material construction, thickness or basis weight, printable surface, ink, drying and handling. List the full material range and include a difficult representative job in the trial. A broad application name is not a guarantee for every stock.

What material details should I provide?MATERIALS & INK

For film, give the grade, layers, thickness and surface treatment. For paper or nonwoven, provide the weight per square meter and printable side. For self-adhesive labels, identify the face material, adhesive and release liner. Send data sheets and discuss a suitable sample roll.

Are roll width, print width and repeat length the same?MATERIALS & INK

No. Roll or web width is the full material width. Usable print width is the area available for the printed layout. Repeat length runs along the moving material and describes a repeating printed layout. Include all three, with edge and trim allowances.

How do I choose the number of color stations?MATERIALS & INK

Count the actual ink separations in your artwork, including white and separately mixed brand colors. List varnish and other processes separately so the supplier can assign the required stations. Color count alone does not define coatings, finishing or colors available on each face.

Can I use water-based and UV-curable inks on the same machine?MATERIALS & INK

Only if the specified equipment and ink system support the proposed combination. Water-based ink needs suitable drying; UV-curable ink needs a compatible UV source. Confirm the ink, dryer or curing unit, stock and operating conditions rather than assuming interchangeability.

Which speed should I use to compare machines?OUTPUT & CONTROLS

Use printing speed and accepted output under stated job conditions. Record the material, artwork, ink coverage, width, quality target and required finishing. Mechanical speed does not establish saleable production, and shift output also depends on setup, cleaning and roll changes.

What is the difference between web guiding and registration?OUTPUT & CONTROLS

A web guide helps control lateral material position. Color registration aligns the ink separations; print-to-die registration aligns the cutting outline with the printed design. Ask which functions are supplied and whether adjustment is manual, electric or automatic.

Does dual unwind or rewind mean non-stop production?OUTPUT & CONTROLS

Not by itself. Two roll positions do not establish automatic splicing, cutting or transfer. Request the complete change sequence at both ends of the machine, including what stops, which actions are manual and how rolls are loaded and removed.

Is a touchscreen proof of automatic register control?OUTPUT & CONTROLS

No. A touchscreen is the operator interface. Ask what is sensed, what is adjusted and whether the control corrects alignment automatically. Demonstrate startup, steady production and speed changes with your material.

Does every label flexo press include die-cutting?LABELS & FINISHING

No. Printing, die-cutting, waste removal, slitting and other converting modules are separate scope items. Confirm the exact stations, tools, repeat ranges and finished-roll requirements in the proposal. Product-family wording does not establish that every variant has the same modules.

What is the difference between die-cutting and slitting?LABELS & FINISHING

Die-cutting forms the label outline. Slitting divides the wide material into narrower lanes. For self-adhesive labels on backing, the agreed kiss cut should leave the release liner intact, and waste removal should leave the labels ready for the required roll format.

Should finishing be inline or offline?LABELS & FINISHING

Inline finishing runs on the printing line; offline finishing uses separate equipment. Compare the required processes, capacity, tooling, material transfer and job scheduling across the whole workflow. Include any finishing equipment you already own.

Can a fixed flexo plate print unique codes on every label?LABELS & FINISHING

A fixed plate repeats its image. Changing serial numbers or other variable data need a suitable coding or digital process, integrated or separate. Specify the data, verification requirement and workflow; do not assume a digital module is included.

What should I include in a request for quotation?RFQ & DELIVERY

Send material data, artwork dimensions, ink separations, order mix and accepted-output target. Add roll sizes, finishing, factory needs, schedule and any preferred configuration. Identify unknown items as questions. The Procurement Checklist & RFQ Guide provides an editable brief.

What does a machine quotation need to include?RFQ & DELIVERY

Ask for the exact configuration, operating ranges, supplied tools and quantities, required options and exclusions. Record the currency, price validity, trial, delivery milestones, installation, training, warranty and service scope. Keep unpriced or unconfirmed items visible.

What is the lead time and when does it start?RFQ & DELIVERY

Request a schedule for the selected model and scope. Define the start event, such as specification approval and the agreed commercial prerequisites. Separate factory test, dispatch, transit, arrival, installation and production readiness instead of treating them as one date.

What payment terms apply?RFQ & DELIVERY

Ask for the amounts or percentages, due events, currency and required documents in the written quotation. Agree payment separately from delivery terms and machine acceptance. This guide does not prescribe a universal deposit or balance percentage.

Can I discuss sample testing before placing an order?TRIALS & SUPPORT

Yes. RAZP invites sample discussions, including projects that are not ready for an immediate purchase. Describe the stock, artwork and desired result first, then agree sample quantities, test availability, conditions and any costs before sending material.

What is a factory acceptance test, or FAT?TRIALS & SUPPORT

A FAT checks the machine before shipment using agreed conditions and pass criteria. Identify the actual configuration, stock, artwork, ink, speed, test duration and sampling. Record print and finishing results, accepted output, waste, deviations and any retest.

Are installation and operator training available?TRIALS & SUPPORT

RAZP offers installation and commissioning support. Request the scope for your order: who attends, what jobs and maintenance tasks are covered, training language, site prerequisites and responsibility for travel, local costs and connections.

How should I confirm warranty and after-sales service?TRIALS & SUPPORT

Write down the warranty start event, duration, covered parts, exclusions and responsibility for labor, freight and travel. Confirm the service contact, remote or onsite scope, recommended spares and replacement lead times. Initial response, onsite arrival and repair completion are different commitments.

Have a question that depends on your job?

Describe the actual stock, artwork and production target so the answer can address your configuration.

Ask a Technical Buying Question

02 / TWO USEFUL DISTINCTIONS

Check dimensions and equipment scope separately.

Roll width, usable print width and repeat length describe different dimensions.
Roll width, usable print width and repeat length describe different dimensions.
An itemized scope shows what is included, optional, excluded or still unconfirmed.
An itemized scope shows what is included, optional, excluded or still unconfirmed.

03 / PREPARE THE INQUIRY

Bring the job details into the conversation.

Start with what you know. Material data, sample artwork, typical order lengths and the finished-roll requirement make the proposal more useful.

Request an Equipment Proposal
  • 01Material, stock construction and sample availability
  • 02Web width, usable print width and repeat
  • 03Colors, ink, print faces and finishing
  • 04Accepted output, rolls, site and schedule

04 / NEXT STEPS

Continue with the resource you need.

Compare press layouts

Review CI and stack structures and the production questions behind the choice.

Read CI vs Stack

Ready to discuss your project with RAZP?

Use the inquiry form to share your requirements and the questions you want answered.

Contact RAZP About My Project
References & further reading