UNDERSTAND THE SPECIFICATION. ASK A CLEARER QUESTION.
Flexo Glossary
Plain-English Terms
Look up the words used in flexo press specifications and equipment proposals. Each definition includes a practical buyer check so you can turn a term into a useful supplier question.
01 / TERMS A–Z
Find a term, then check what it means for your order.
Search the term or its meaning, select a topic or filter by its first letter.
No matches. Try another word or clear the filters.
CONTROLS & ROLLS
Air shaft
An expanding shaft that grips the inside of a roll core.
Buyer check: Confirm core size, roll weight and how the roll is loaded.
INK & PRINTING
Anilox roller
An engraved roller that meters ink to the flexographic printing plate.
Buyer check: Request the surface, line screen, cell volume and supplied roller set.
CONTROLS & ROLLS
Automatic register control
A system that measures alignment and makes corrections automatically within its specified functions.
Buyer check: Ask what is measured and corrected; electric adjustment alone is different.
MATERIAL & SIZE
Basis weight
The mass of material per unit area, commonly stated in grams per square meter, or g/m².
Buyer check: Use it for the actual paper or nonwoven; thickness is a separate dimension.
MATERIAL & SIZE
BOPP
Biaxially oriented polypropylene: a PP film stretched in two directions during manufacture.
Buyer check: State the grade, coating and thickness rather than only the polymer name.
INK & PRINTING
Cell volume
The capacity of the engraved anilox cells per unit surface area.
Buyer check: Record the units and review volume together with line screen and the ink.
CONTROLS & ROLLS
Center-driven winding
Winding in which drive torque acts through the roll or core axis.
Buyer check: Confirm tension control, roll dimensions and the complete change sequence.
INK & PRINTING
Ceramic anilox roller
An anilox roller with an engraved ceramic surface used to meter ink.
Buyer check: The ceramic label alone does not specify the engraving or guarantee print quality.
PRESS & PROCESS
CI flexo press
A central impression flexographic press whose color stations work around a shared impression drum.
Buyer check: Compare its drive, register, drying and roll handling as separate configuration choices.
INK & PRINTING
CMYK
Cyan, magenta, yellow and black: four process inks used to build many printed colors.
Buyer check: Count white, spot colors and any separate coating requirements in addition.
LABEL FINISHING
Coating station
A station that applies a specified coating, such as an overprint varnish.
Buyer check: Confirm the coating method, drying or cure and whether another station is needed.
CONTROLS & ROLLS
Color registration
The alignment of one printed ink separation with the others.
Buyer check: Agree a test method and limit on the actual stock at the intended speed.
BUYING & ACCEPTANCE
Commissioning
Setting up and checking the installed machine so it can begin the agreed operation.
Buyer check: Define site prerequisites, test jobs, responsibilities and the handover record.
MATERIAL & SIZE
CPP
Cast polypropylene: a PP film made by a casting process.
Buyer check: Do not substitute BOPP or a generic PP description for the actual stock.
LABEL FINISHING
Die-cutting
Cutting a defined outline with shaped tooling.
Buyer check: Confirm the stock, cutting depth, outline and compatible tool repeat.
INK & PRINTING
Doctor blade
A blade used to remove excess ink from the anilox surface.
Buyer check: Ask which inking and blade arrangement is supplied and how it is cleaned.
CONTROLS & ROLLS
Dual unwind / rewind
A description indicating two roll positions in an unwind or rewind arrangement.
Buyer check: Ask whether the press stops during a change; two positions do not prove automatic splicing.
CONTROLS & ROLLS
Electric register adjustment
Alignment adjustment moved by electrical actuation under the specified controls.
Buyer check: Confirm whether correction is operator-commanded or uses automatic measurement and feedback.
BUYING & ACCEPTANCE
Energy use (kWh)
Energy consumed over time; kWh means kilowatt-hours.
Buyer check: Compare measured consumption over a defined job, not a power rating alone.
CONTROLS & ROLLS
EPC / web guiding
Edge position control: guiding that helps keep the moving material laterally aligned.
Buyer check: Web guiding is not itself color-to-color or print-to-die register control.
MATERIAL & SIZE
Face material
The paper or film layer of a label that carries the printed image.
Buyer check: Identify its coating, treatment and compatibility with the ink and complete label stock.
BUYING & ACCEPTANCE
Factory acceptance test (FAT)
An agreed machine check at the supplier site before shipment.
Buyer check: Define stock, artwork, conditions, pass criteria, results and any retest.
PRESS & PROCESS
Flexographic printing
Printing that uses flexible relief plates and metered ink to transfer an image to material.
Buyer check: Identify the actual ink, plate, material and equipment needed for the job.
CONTROLS & ROLLS
Gearless drive
A drive arrangement that removes specified mechanical gear links and uses coordinated drives instead.
Buyer check: Ask which parts are independently driven; CI layout alone does not prove a gearless press.
CONTROLS & ROLLS
HMI
Human-machine interface: the screen or controls through which the operator interacts with the machine.
Buyer check: A touchscreen does not establish which automatic functions are included.
LABEL FINISHING
Inline finishing
Finishing processes performed on the printing line as part of the connected workflow.
Buyer check: List each required module and check the full line on the intended job.
BUYING & ACCEPTANCE
Installed power (kW)
The stated installed power rating, expressed in kilowatts.
Buyer check: Request the utility schedule; installed power is not measured job energy consumption.
BUYING & ACCEPTANCE
Job changeover
The work needed to move from one print job to the next.
Buyer check: Agree the timing boundary, such as last acceptable output to first acceptable output.
LABEL FINISHING
Kiss cutting
For labels on backing, cutting the face and adhesive while leaving the release liner intact.
Buyer check: Test the actual liner, adhesive, shape and speed for clean cutting and waste removal.
MATERIAL & SIZE
Label pitch
The distance from one label position to the next along the material, including the gap.
Buyer check: A print or die repeat may contain more than one label pitch.
LABEL FINISHING
Lamination
Joining layers in a specified arrangement, including a protective film where required.
Buyer check: Confirm the material, bonding method and included module rather than assuming a standard setup.
BUYING & ACCEPTANCE
Lead time
A time interval with an agreed start event and end milestone.
Buyer check: Separate production, dispatch, transit, installation and production readiness.
INK & PRINTING
Line screen
For an anilox roller, the count of ink-carrying cells per unit length, often stated per inch or centimeter.
Buyer check: State the units; anilox screen and artwork or plate screen describe different things.
LABEL FINISHING
Matrix stripping
Removing the unwanted label face material around the cut labels.
Buyer check: Check waste breaks, lifting labels and performance with small shapes and narrow gaps.
MATERIAL & SIZE
MD / CD
Machine direction runs along material travel; cross direction runs across the web.
Buyer check: State the direction when specifying or recording alignment measurements.
PRESS & PROCESS
Mechanical speed
The stated running speed of the machine mechanism.
Buyer check: It does not establish accepted printed output for your material, ink and artwork.
INK & PRINTING
Metal anilox roller
An anilox roller described as metal in the equipment specification.
Buyer check: Ask for the exact surface and engraving; do not assume a plating or life expectancy.
MATERIAL & SIZE
Micron (µm)
A unit of length equal to one thousandth of a millimeter, often used for film thickness.
Buyer check: Identify which layer or complete construction is being measured.
LABEL FINISHING
Offline finishing
Finishing on a machine separate from the printing press.
Buyer check: Check width, roll, repeat, sensing and tooling compatibility across the handoff.
MATERIAL & SIZE
PE
Polyethylene: a polymer family that includes different grades used in films and coatings.
Buyer check: Give the grade, structure, thickness and printable surface.
MATERIAL & SIZE
PET
Polyethylene terephthalate: a polyester material used in some films and label constructions.
Buyer check: Keep PET distinct from PE and state the actual layer or stock construction.
INK & PRINTING
Photopolymer plate
A flexible relief printing plate made from a light-sensitive polymer material.
Buyer check: Confirm plate thickness, mounting method and tooling compatibility.
CONTROLS & ROLLS
PLC
Programmable logic controller: a controller used to run specified machine sequences and functions.
Buyer check: Ask what the supplied control system actually operates and what support is available.
MATERIAL & SIZE
PP
Polypropylene: a polymer family that includes different film forms such as CPP and BOPP.
Buyer check: Specify the actual form and treatment instead of treating all PP films as interchangeable.
MATERIAL & SIZE
Print repeat
The length of a repeating printed layout along the moving material.
Buyer check: Check the supported tooling range and distinguish repeat from label length alone.
CONTROLS & ROLLS
Print-to-die registration
The alignment of a cutting outline with the printed design.
Buyer check: Set this acceptance check separately from color-to-color alignment.
PRESS & PROCESS
Printing speed
Web speed while printing under stated material, artwork, ink and operating conditions.
Buyer check: Record the accepted print and finishing result, not only the speed display.
MATERIAL & SIZE
Printing width
The usable width available for the printed layout across the material.
Buyer check: Confirm allowances and tooling; maximum web width is not automatically usable print width.
MATERIAL & SIZE
Release liner
The backing that carries self-adhesive labels before application and allows them to be released.
Buyer check: Specify liner material and thickness when discussing die-cutting and waste removal.
BUYING & ACCEPTANCE
RFQ
Request for quotation: a brief asking a supplier for a priced proposal against stated requirements.
Buyer check: Provide the job and output needs, then request an itemized supply and service scope.
CONTROLS & ROLLS
Roll core
The tube or center on which material is wound.
Buyer check: State core dimensions separately from outer roll diameter and roll weight.
CONTROLS & ROLLS
Roll diameter
The outside diameter of an incoming or finished material roll.
Buyer check: Check unwind and rewind limits, roll weight and loading equipment separately.
BUYING & ACCEPTANCE
Saleable output
Production that meets the agreed quality and finished-product requirements.
Buyer check: State units and time period, and account for setup, waste and changes.
MATERIAL & SIZE
Self-adhesive label stock
A label construction made from face material, adhesive and a release liner.
Buyer check: Evaluate the complete stock rather than the printable face alone.
CONTROLS & ROLLS
Servo drive
A motor-and-control arrangement that uses feedback to control specified motion.
Buyer check: Name the driven parts and control functions; a servo label does not define the whole press.
PRESS & PROCESS
Slitter rewinder
A machine that slits a material web into narrower widths and rewinds it.
Buyer check: It is converting equipment; it does not add printing merely because a press is upstream.
LABEL FINISHING
Slitting
Cutting a wide material web into narrower lanes.
Buyer check: State finished widths, edge quality, blades and roll-format requirements.
INK & PRINTING
Spot color
A separately mixed ink used for a specified color rather than built only from CMYK.
Buyer check: Count it as a separate ink separation and agree the color target.
PRESS & PROCESS
Stack flexo press
A flexographic press with vertically arranged printing units and separate impression supports.
Buyer check: Review print-side routing, drive, access, anilox and roll handling on the actual machine.
MATERIAL & SIZE
Substrate
The material that receives the printed image; also called printing stock.
Buyer check: State the complete construction, dimensions and printable surface.
CONTROLS & ROLLS
Turret rewinder
A rewinder with multiple roll positions carried on a rotating structure.
Buyer check: Confirm cutting, transfer and change behavior; the name alone does not define non-stop operation.
INK & PRINTING
UV-curable ink
Ink formulated to harden through exposure to a compatible ultraviolet source.
Buyer check: Match the formulation and UV source, including lamp or LED compatibility, and verify cure.
LABEL FINISHING
Varnishing
Applying a specified coating to change appearance or protect the printed surface.
Buyer check: Check the station, material compatibility and drying or curing requirements.
INK & PRINTING
Water-based ink
Ink whose liquid vehicle uses water as a significant component.
Buyer check: It still needs suitable drying; the name alone does not prove end-use suitability.
CONTROLS & ROLLS
Web tension
The pulling force maintained in a span of moving material.
Buyer check: Check control behavior with the actual material and throughout the roll.
MATERIAL & SIZE
Web width
The full width of the material fed through the machine.
Buyer check: Record usable printing width separately and include edge or trim allowances.
Does a specification need clarification?
Quote the term and describe the material, job and function you need to confirm.
02 / SEE THE DIFFERENCE
Three useful concepts in pictures.
Width is across the material; repeat runs along it.
Anilox, plate and impression support have different roles.
Kiss cutting, waste removal and slitting are different steps.
Need to connect the terms to a real machine?
Share the job and the proposed configuration so the relevant functions can be discussed together.
03 / KEEP A REFERENCE
Use the glossary when reviewing proposals.
Download the term sheet
Keep the definitions and buyer checks in an editable reference file.
Download glossary (.csv)Read the buying guides
See how the terms fit into CI, stack and label equipment selection.
Explore the guide libraryCheck the procurement scope
Use an RFQ to state required functions, tools, trials and responsibilities.
Open the procurement guideReady to put the requirements in writing?
Use the inquiry form to describe your stock, printed layout, output and the functions you need.
