FOR PRINTERS, CONVERTERS & EQUIPMENT BUYERS
Buyer’s Guide
Flexo Press Selection
Find a practical starting point for your next equipment decision. Compare CI and stack presses, define the machine configuration, plan label finishing or prepare an inquiry around your actual production jobs.
Still comparing press types?
Start with CI vs stack to understand the layout and production questions that affect the next equipment discussion.
Start with the comparisonAlready preparing an inquiry?
Use the procurement checklist to organize the job brief, equipment scope, trial and service questions.
Prepare your RFQ01 / FIND YOUR STARTING POINT
What do you need to decide?
Choose the task closest to your current project. Each route points to the guide that explains the next set of buying questions.
Hover or click a task below
01 / 04
Should you evaluate CI or stack first?
Start with the structural comparison when the press layout is still an open question. Then use the relevant machine guide to check the exact configuration.
- Compare material handling and color alignment.
- Include job changes, roll handling and the complete investment.
- Use your material and artwork to assess the proposed equipment.
Press layout alone does not establish every drive, control or finishing function.
02 / 04
Ready to define a CI or stack press?
Use the machine-specific guide to turn the print job into a configuration brief. Both routes start with the actual stock, layout, ink and production requirement.
- CI guide: width, colors, drying, controls and winding.
- Stack guide: print faces, anilox, access and roll changes.
- For either route, compare accepted output on a representative job.
Compare the supplied functions and tools in the quotation, then agree the trial.
03 / 04
What must happen between label stock and finished rolls?
Use the label guide when printing, die-cutting and finished-roll delivery need to be planned together. Start with the complete stock and the required output.
- Specify the face material, adhesive and release liner where applicable.
- Check label layout, colors, ink and print-to-cut alignment.
- Define die-cutting, waste removal, slitting and finished rolls.
Confirm each finishing module and tool; the label-press name does not define the full workflow.
04 / 04
Need a clear inquiry or a comparable quotation?
An RFQ is a request for quotation. Use the procurement guide to organize the requirements, identify open questions and compare the full supply and service scope.
- Prepare the production brief and required equipment.
- Record what is included, optional, excluded or not confirmed.
- Agree the trial, delivery milestones, training and support.
You can begin an inquiry before every detail is known. List the items you still need to discuss.
Not sure which guide matches your project?
Share the material, finished product and the production question you want to resolve.
02 / THE GUIDE LIBRARY
Five guides, from press comparison to RFQ.
Open the guide you need now. Use the machine-specific pages for configuration details and the procurement guide when you are ready to compare proposals.
START WITH THE PRESS LAYOUT
CI vs Stack Type Flexo Press
Compare the press structures, material handling, color alignment, job changes and complete investment. Use the comparison to decide which configuration deserves a closer review.
- Press structure
- Material handling
- Total investment
DEFINE A CI PRESS CONFIGURATION
How to Choose a CI Flexo Printing Machine
Work from your material and artwork to width, color stations, drying, controls and roll handling. Prepare a trial and installation brief for the proposed CI press.
- Width & repeat
- Drying & controls
- Roll handling
REVIEW A STACK PRESS PROPOSAL
Stack Type Flexo Press Buying Guide
Compare materials, color stations, anilox specifications, drive controls, drying and roll changes. Check the equipment and operating sequence needed for your actual jobs.
- Colors & print sides
- Anilox selection
- Usable output
PLAN PRINTING AND CONVERTING
Flexo Label Printing Machine Guide
Connect label stock, artwork, ink, register and die-cutting with the finished-roll format. Compare inline and offline finishing and identify the tools and modules required.
- Label stock
- Die-cutting & slitting
- Finished rolls
PREPARE THE BRIEF AND COMPARE THE OFFER
Procurement Checklist & RFQ Guide
Use 21 preparation checks to organize the inquiry, compare quotation scope and agree the trial, delivery and support requirements. Download RFQ, comparison and test-planning templates.
- RFQ preparation
- Quotation scope
- Factory acceptance
Ready to discuss a configuration for your jobs?
Bring your material, artwork, color count and required output to the equipment conversation.
03 / PRACTICAL BUYER TOOLS
Prepare a clearer equipment conversation.
Use these editable templates alongside the Procurement Checklist & RFQ Guide. List unknowns as questions and agree the final requirements with the supplier.
RFQ requirement template
Organize stock, artwork, output, site and service requirements before requesting a proposal.
Download RFQ template (.txt)Quotation comparison sheet
Compare three supplier replies, included equipment, required options and open questions.
Download comparison sheet (.csv)Factory-trial planning record
Prepare test conditions, pass criteria, result records and follow-up for an agreed trial.
Download test record (.txt)Need help using the templates? Read the Procurement Checklist & RFQ Guide
Have a sample, specification or draft RFQ to discuss?
Use the inquiry form to describe your project and the questions you need answered.
04 / BEFORE YOU START
Common questions about choosing a guide
Where should I start if I have not chosen CI or stack?
Open CI vs Stack Type Flexo Press to compare the structures and their production implications. Then use the CI or stack buying guide to review the proposed configuration against your material and artwork.
Can I choose a press from its maximum speed alone?
Compare the complete configuration and a representative printing job. Drying or cure, material handling, finishing, setup waste and roll changes all affect accepted output. The machine guides explain what to check.
Which guide covers die-cutting and slitting?
Use the Flexo Label Printing Machine Guide. It connects complete label stock, print layout, die-cutting, waste removal and the finished-roll format, including inline and offline finishing questions.
What should I prepare before requesting a quotation?
Start with material data, artwork dimensions, ink separations, typical orders and the finished output required. Add roll sizes, site needs and your target schedule as available. The RFQ template provides a structure; you can discuss missing items with the supplier.
What does a factory acceptance test involve?
A factory acceptance test, or FAT, checks the proposed machine before shipment using agreed conditions and criteria. The procurement guide and test-planning record help you define the stock, artwork, checks, results and follow-up for your order.
Tell us what you need to print.
Share your material, artwork and finished-output requirements to discuss a suitable equipment proposal.
