CHOOSE THE PRESS AROUND THE JOB.

Stack Type Flexo
Press Buying Guide

A stack flexo press has vertically arranged printing units, each with its own impression roller. Choose around your material, artwork, ink and daily production needs, then compare the equipment actually included.

Stack printing units with separate impression supports and three groups of purchasing requirementsSTACK PRESS SELECTIONChoose around your actual printing jobs.SEPARATE IMPRESSION SUPPORTSPrintcontact01YOUR MATERIALType, width and print repeat02PRINT & INKColors, anilox and drying03PRODUCTION NEEDSOutput, roll changes and accessMaterial travelSimplified units; not shown to scale.
Stack layout illustration. Units and dimensions are simplified, not a color-count specification.

Start with the printed job.

Bring the material specification and artwork. Define the print width, repeat length, ink separations and colors needed on each face.

Compare a complete offer.

Review the anilox specification, drive and registration controls, drying, roll changes and job-change routine before comparing usable output and cost.

01 / STACK PRESS SELECTION

Choose the features your production needs.

Use these seven checks to prepare an inquiry and assess the proposed stack press with your material and artwork.

Hover or click a factor below

Labeled differences between full roll width, usable print width and one printed design repeatRoll width and print width are different.The repeat length is the length of one design along the moving material.YOUR PRINTED DESIGNYOUR PRINTED DESIGNYOUR PRINTED DESIGNA · ROLL WIDTHB · USABLE PRINT WIDTHC · DESIGNREPEAT LENGTHMaterialtravelSend both width dimensions and the shortest and longest design repeats.BUYER GUIDE ILLUSTRATION · NOT AN ENGINEERING DRAWING
Width and repeat are shown schematically; no fixed edge allowance is implied.

01 / 07

Will the press handle your material and artwork size?

Start with the roll material, its thickness or weight, and the complete printed layout. A machine listed for film is not automatically suitable for every film grade.

SELECTION ADVICE

Define the material range

For film, give the grade, layers, thickness and surface treatment. For paper or nonwoven, give the weight per square meter and printable side. Include your most difficult material in the trial.

PRACTICAL CHECK

Check both widths and the repeat

Roll width is the full material width; print width is the usable printed area. Repeat length is the length of one repeated design along the material. Send the minimum and maximum sizes your jobs require.

WHAT TO PREPARE

  • A sample roll and an artwork layout with edge or trim allowances
  • Material range, incoming roll width, usable print width and repeat lengths

Check the smallest job as well as the largest. The quotation should state which widths and repeats the proposed machine and tools support.

Selection principleCompare the material, artwork, accepted print quality and equipment scope before choosing a model or speed class.

Turn your job requirements into a stack press proposal.

Share your material, artwork, colors and output needs to discuss a suitable configuration.

Request a Stack Press Configuration

02 / METAL & CERAMIC ANILOX

Compare the complete anilox specification.

RAZP lists both options. Request the details below for each proposal rather than selecting from the surface label alone.

Item to compareWhat to requestWhy it matters
Surface and constructionThe exact metal surface or ceramic coating and the engraving suppliedThe general material name does not define the complete roller.
Line screenThe number or spacing of ink-carrying cells, with the stated unitsReview it with the cell volume and the printed detail.
Cell volumeThe capacity of the engraved cells per area, with the stated unitsIt affects the ink available to transfer; more is not always better.
Artwork and inkSamples with the intended plate, ink, material and coverageThe roller must suit the job, including text, images and solid areas.
Cleaning and conditionThe cleaning method, inspection routine and replacement or refurbishment planContamination and roller condition can affect the print result.
Included roller setThe rollers supplied, extra rollers needed and the complete quotation scopeCompare the equipment needed for the same range of jobs.

Not sure which anilox set your jobs need?

Send sample artwork and ink details so the proposed rollers can be discussed around your actual print requirements.

Review My Anilox Requirements

03 / EXPLORE RAZP STACK PRESSES

Compare configurations for your printing jobs.

Use the product pages as starting points. Request the current machine specification, included options and print-trial conditions for the configuration offered.

RAZP metal-anilox stack press — official product-page image
RAZP product image. Example configuration; images are not shown to the same scale.

Metal-anilox stack press

Discuss the metal-anilox specification and the named dual unwind / rewind arrangement. Ask for the actual loading and roll-change sequence.

View this stack press
RAZP ceramic-anilox stack press — official product-page image
RAZP product image. Example configuration; images are not shown to the same scale.

Ceramic-anilox stack press

Compare the proposed engraving, color stations, controls and drying with your artwork. Include operator access and job changes in the demonstration.

View this stack press
RAZP additional ceramic-anilox configuration — official product-page image
RAZP product image. Example configuration; images are not shown to the same scale.

Additional ceramic-anilox configuration

Review this alternative against the same material, print quality and output targets. Request an itemized equipment list and an actual printing-speed trial.

View this stack press

04 / PREPARE YOUR INQUIRY

Tell us what your next stack press needs to do.

Share a material specification, sample artwork and production target. RAZP can discuss the machine, anilox and roll-handling equipment to include in your quotation.

Request a Stack Press Quote

Download the RFQ checklist (.txt)

  • 01Material, thickness and print dimensions
  • 02Artwork, ink separations and colors per face
  • 03Ink type, coverage and print-quality target
  • 04Typical order lengths and usable output
  • 05Roll sizes, loading and change requirements
  • 06Trial jobs, factory needs and budget

05 / BUYER QUESTIONS

Questions before choosing a stack flexo press

Can a stack flexo press print plastic film?

Yes, a suitable configuration can print film. Give the actual grade, thickness, surface treatment and artwork. Check tension control, drying and color alignment on the proposed machine rather than assuming all films behave the same way.

Should I choose metal or ceramic anilox rollers?

Ask for the complete roller specification and test the same ink and artwork. Compare the surface, engraving, line screen, cell volume, cleaning and supplied roller set. The words metal and ceramic do not establish a fixed quality, life or price difference.

How do I choose four, six or eight colors?

Count each ink separation in your actual jobs, including white and spot colors. Then state the colors needed on each face. The proposed machine route and number of passes must support that job; station count alone does not establish two-sided capability.

Does dual unwind / rewind mean non-stop printing?

No. Two roll positions do not establish automatic splicing, cutting or transfer. Ask what the operator does, whether the press stops and how a change works at both ends of the machine. It also does not mean two rolls are being printed simultaneously.

Does a stack press always have manual registration?

No single adjustment system defines the entire layout. Ask which drive and registration controls are included in the exact quotation. Check whether alignment is adjusted manually, electrically or automatically and demonstrate the result with your material.

Can a stack press print both sides in one pass?

Some configurations can. State the colors needed on each face and the front-to-back alignment requirement. Ask the supplier to show the material route and the station allocation for the actual machine offered.

Which speed should I use when comparing machines?

Use the printing speed supported by the material, ink, artwork, drying and finished-roll result. Record usable output after setup and roll changes. A headline or mechanical maximum is not a tested output figure for your job.

Have a question about your stack press requirements?

Ask about anilox options, print sides, drying or roll changes before requesting a detailed proposal.

Ask About a Stack Press
Technical references & product information