UNDERSTAND THE SPECIFICATION. ASK A CLEARER QUESTION.

Flexo Glossary
Plain-English Terms

Look up the words used in flexo press specifications and equipment proposals. Each definition includes a practical buyer check so you can turn a term into a useful supplier question.

Read the specification with more clarity.FLEXO GLOSSARYRead the specification with more clarity.01UNDERSTAND THE TERMA short definition in plain English02SEPARATE SIMILAR WORDSWeb width vs print width · adjustment vs automatic control03ASK THE BUYING QUESTIONConfirm the supplied function, material and test conditionsBuyer guidance, not engineering dimensions or measured performance.
Practical buying guidance. Confirm the actual configuration and operating conditions for your project.

01 / TERMS A–Z

Find a term, then check what it means for your order.

Search the term or its meaning, select a topic or filter by its first letter.

66 of 66 terms shown

CONTROLS & ROLLS

Air shaft

An expanding shaft that grips the inside of a roll core.

Buyer check: Confirm core size, roll weight and how the roll is loaded.

INK & PRINTING

Anilox roller

An engraved roller that meters ink to the flexographic printing plate.

Buyer check: Request the surface, line screen, cell volume and supplied roller set.

CONTROLS & ROLLS

Automatic register control

A system that measures alignment and makes corrections automatically within its specified functions.

Buyer check: Ask what is measured and corrected; electric adjustment alone is different.

MATERIAL & SIZE

Basis weight

The mass of material per unit area, commonly stated in grams per square meter, or g/m².

Buyer check: Use it for the actual paper or nonwoven; thickness is a separate dimension.

MATERIAL & SIZE

BOPP

Biaxially oriented polypropylene: a PP film stretched in two directions during manufacture.

Buyer check: State the grade, coating and thickness rather than only the polymer name.

INK & PRINTING

Cell volume

The capacity of the engraved anilox cells per unit surface area.

Buyer check: Record the units and review volume together with line screen and the ink.

CONTROLS & ROLLS

Center-driven winding

Winding in which drive torque acts through the roll or core axis.

Buyer check: Confirm tension control, roll dimensions and the complete change sequence.

INK & PRINTING

Ceramic anilox roller

An anilox roller with an engraved ceramic surface used to meter ink.

Buyer check: The ceramic label alone does not specify the engraving or guarantee print quality.

PRESS & PROCESS

CI flexo press

A central impression flexographic press whose color stations work around a shared impression drum.

Buyer check: Compare its drive, register, drying and roll handling as separate configuration choices.

INK & PRINTING

CMYK

Cyan, magenta, yellow and black: four process inks used to build many printed colors.

Buyer check: Count white, spot colors and any separate coating requirements in addition.

LABEL FINISHING

Coating station

A station that applies a specified coating, such as an overprint varnish.

Buyer check: Confirm the coating method, drying or cure and whether another station is needed.

CONTROLS & ROLLS

Color registration

The alignment of one printed ink separation with the others.

Buyer check: Agree a test method and limit on the actual stock at the intended speed.

BUYING & ACCEPTANCE

Commissioning

Setting up and checking the installed machine so it can begin the agreed operation.

Buyer check: Define site prerequisites, test jobs, responsibilities and the handover record.

MATERIAL & SIZE

CPP

Cast polypropylene: a PP film made by a casting process.

Buyer check: Do not substitute BOPP or a generic PP description for the actual stock.

LABEL FINISHING

Die-cutting

Cutting a defined outline with shaped tooling.

Buyer check: Confirm the stock, cutting depth, outline and compatible tool repeat.

INK & PRINTING

Doctor blade

A blade used to remove excess ink from the anilox surface.

Buyer check: Ask which inking and blade arrangement is supplied and how it is cleaned.

CONTROLS & ROLLS

Dual unwind / rewind

A description indicating two roll positions in an unwind or rewind arrangement.

Buyer check: Ask whether the press stops during a change; two positions do not prove automatic splicing.

CONTROLS & ROLLS

Electric register adjustment

Alignment adjustment moved by electrical actuation under the specified controls.

Buyer check: Confirm whether correction is operator-commanded or uses automatic measurement and feedback.

BUYING & ACCEPTANCE

Energy use (kWh)

Energy consumed over time; kWh means kilowatt-hours.

Buyer check: Compare measured consumption over a defined job, not a power rating alone.

CONTROLS & ROLLS

EPC / web guiding

Edge position control: guiding that helps keep the moving material laterally aligned.

Buyer check: Web guiding is not itself color-to-color or print-to-die register control.

MATERIAL & SIZE

Face material

The paper or film layer of a label that carries the printed image.

Buyer check: Identify its coating, treatment and compatibility with the ink and complete label stock.

BUYING & ACCEPTANCE

Factory acceptance test (FAT)

An agreed machine check at the supplier site before shipment.

Buyer check: Define stock, artwork, conditions, pass criteria, results and any retest.

PRESS & PROCESS

Flexographic printing

Printing that uses flexible relief plates and metered ink to transfer an image to material.

Buyer check: Identify the actual ink, plate, material and equipment needed for the job.

CONTROLS & ROLLS

Gearless drive

A drive arrangement that removes specified mechanical gear links and uses coordinated drives instead.

Buyer check: Ask which parts are independently driven; CI layout alone does not prove a gearless press.

CONTROLS & ROLLS

HMI

Human-machine interface: the screen or controls through which the operator interacts with the machine.

Buyer check: A touchscreen does not establish which automatic functions are included.

LABEL FINISHING

Inline finishing

Finishing processes performed on the printing line as part of the connected workflow.

Buyer check: List each required module and check the full line on the intended job.

BUYING & ACCEPTANCE

Installed power (kW)

The stated installed power rating, expressed in kilowatts.

Buyer check: Request the utility schedule; installed power is not measured job energy consumption.

BUYING & ACCEPTANCE

Job changeover

The work needed to move from one print job to the next.

Buyer check: Agree the timing boundary, such as last acceptable output to first acceptable output.

LABEL FINISHING

Kiss cutting

For labels on backing, cutting the face and adhesive while leaving the release liner intact.

Buyer check: Test the actual liner, adhesive, shape and speed for clean cutting and waste removal.

MATERIAL & SIZE

Label pitch

The distance from one label position to the next along the material, including the gap.

Buyer check: A print or die repeat may contain more than one label pitch.

LABEL FINISHING

Lamination

Joining layers in a specified arrangement, including a protective film where required.

Buyer check: Confirm the material, bonding method and included module rather than assuming a standard setup.

BUYING & ACCEPTANCE

Lead time

A time interval with an agreed start event and end milestone.

Buyer check: Separate production, dispatch, transit, installation and production readiness.

INK & PRINTING

Line screen

For an anilox roller, the count of ink-carrying cells per unit length, often stated per inch or centimeter.

Buyer check: State the units; anilox screen and artwork or plate screen describe different things.

LABEL FINISHING

Matrix stripping

Removing the unwanted label face material around the cut labels.

Buyer check: Check waste breaks, lifting labels and performance with small shapes and narrow gaps.

MATERIAL & SIZE

MD / CD

Machine direction runs along material travel; cross direction runs across the web.

Buyer check: State the direction when specifying or recording alignment measurements.

PRESS & PROCESS

Mechanical speed

The stated running speed of the machine mechanism.

Buyer check: It does not establish accepted printed output for your material, ink and artwork.

INK & PRINTING

Metal anilox roller

An anilox roller described as metal in the equipment specification.

Buyer check: Ask for the exact surface and engraving; do not assume a plating or life expectancy.

MATERIAL & SIZE

Micron (µm)

A unit of length equal to one thousandth of a millimeter, often used for film thickness.

Buyer check: Identify which layer or complete construction is being measured.

LABEL FINISHING

Offline finishing

Finishing on a machine separate from the printing press.

Buyer check: Check width, roll, repeat, sensing and tooling compatibility across the handoff.

MATERIAL & SIZE

PE

Polyethylene: a polymer family that includes different grades used in films and coatings.

Buyer check: Give the grade, structure, thickness and printable surface.

MATERIAL & SIZE

PET

Polyethylene terephthalate: a polyester material used in some films and label constructions.

Buyer check: Keep PET distinct from PE and state the actual layer or stock construction.

INK & PRINTING

Photopolymer plate

A flexible relief printing plate made from a light-sensitive polymer material.

Buyer check: Confirm plate thickness, mounting method and tooling compatibility.

CONTROLS & ROLLS

PLC

Programmable logic controller: a controller used to run specified machine sequences and functions.

Buyer check: Ask what the supplied control system actually operates and what support is available.

MATERIAL & SIZE

PP

Polypropylene: a polymer family that includes different film forms such as CPP and BOPP.

Buyer check: Specify the actual form and treatment instead of treating all PP films as interchangeable.

MATERIAL & SIZE

Print repeat

The length of a repeating printed layout along the moving material.

Buyer check: Check the supported tooling range and distinguish repeat from label length alone.

CONTROLS & ROLLS

Print-to-die registration

The alignment of a cutting outline with the printed design.

Buyer check: Set this acceptance check separately from color-to-color alignment.

PRESS & PROCESS

Printing speed

Web speed while printing under stated material, artwork, ink and operating conditions.

Buyer check: Record the accepted print and finishing result, not only the speed display.

MATERIAL & SIZE

Printing width

The usable width available for the printed layout across the material.

Buyer check: Confirm allowances and tooling; maximum web width is not automatically usable print width.

MATERIAL & SIZE

Release liner

The backing that carries self-adhesive labels before application and allows them to be released.

Buyer check: Specify liner material and thickness when discussing die-cutting and waste removal.

BUYING & ACCEPTANCE

RFQ

Request for quotation: a brief asking a supplier for a priced proposal against stated requirements.

Buyer check: Provide the job and output needs, then request an itemized supply and service scope.

CONTROLS & ROLLS

Roll core

The tube or center on which material is wound.

Buyer check: State core dimensions separately from outer roll diameter and roll weight.

CONTROLS & ROLLS

Roll diameter

The outside diameter of an incoming or finished material roll.

Buyer check: Check unwind and rewind limits, roll weight and loading equipment separately.

BUYING & ACCEPTANCE

Saleable output

Production that meets the agreed quality and finished-product requirements.

Buyer check: State units and time period, and account for setup, waste and changes.

MATERIAL & SIZE

Self-adhesive label stock

A label construction made from face material, adhesive and a release liner.

Buyer check: Evaluate the complete stock rather than the printable face alone.

CONTROLS & ROLLS

Servo drive

A motor-and-control arrangement that uses feedback to control specified motion.

Buyer check: Name the driven parts and control functions; a servo label does not define the whole press.

PRESS & PROCESS

Slitter rewinder

A machine that slits a material web into narrower widths and rewinds it.

Buyer check: It is converting equipment; it does not add printing merely because a press is upstream.

LABEL FINISHING

Slitting

Cutting a wide material web into narrower lanes.

Buyer check: State finished widths, edge quality, blades and roll-format requirements.

INK & PRINTING

Spot color

A separately mixed ink used for a specified color rather than built only from CMYK.

Buyer check: Count it as a separate ink separation and agree the color target.

PRESS & PROCESS

Stack flexo press

A flexographic press with vertically arranged printing units and separate impression supports.

Buyer check: Review print-side routing, drive, access, anilox and roll handling on the actual machine.

MATERIAL & SIZE

Substrate

The material that receives the printed image; also called printing stock.

Buyer check: State the complete construction, dimensions and printable surface.

CONTROLS & ROLLS

Turret rewinder

A rewinder with multiple roll positions carried on a rotating structure.

Buyer check: Confirm cutting, transfer and change behavior; the name alone does not define non-stop operation.

INK & PRINTING

UV-curable ink

Ink formulated to harden through exposure to a compatible ultraviolet source.

Buyer check: Match the formulation and UV source, including lamp or LED compatibility, and verify cure.

LABEL FINISHING

Varnishing

Applying a specified coating to change appearance or protect the printed surface.

Buyer check: Check the station, material compatibility and drying or curing requirements.

INK & PRINTING

Water-based ink

Ink whose liquid vehicle uses water as a significant component.

Buyer check: It still needs suitable drying; the name alone does not prove end-use suitability.

CONTROLS & ROLLS

Web tension

The pulling force maintained in a span of moving material.

Buyer check: Check control behavior with the actual material and throughout the roll.

MATERIAL & SIZE

Web width

The full width of the material fed through the machine.

Buyer check: Record usable printing width separately and include edge or trim allowances.

Does a specification need clarification?

Quote the term and describe the material, job and function you need to confirm.

Clarify My Equipment Specification

02 / SEE THE DIFFERENCE

Three useful concepts in pictures.

Width and repeat
Width and repeat
Width is across the material; repeat runs along it.
Ink metering
Ink metering
Anilox, plate and impression support have different roles.
Label converting
Label converting
Kiss cutting, waste removal and slitting are different steps.

Need to connect the terms to a real machine?

Share the job and the proposed configuration so the relevant functions can be discussed together.

Discuss the Configuration

03 / KEEP A REFERENCE

Use the glossary when reviewing proposals.

Ready to put the requirements in writing?

Use the inquiry form to describe your stock, printed layout, output and the functions you need.

Discuss My Equipment Requirements
References & further reading