COMPARE THE LAYOUT. PLAN THE INVESTMENT.

CI vs Stack Type
Flexo Press

Start with the material you print, the quality you need and your typical orders. Compare CI and stack presses, then discuss a suitable machine with RAZP.

CI shared impression drum and stack independent impression rollers with material directionCI vs STACKShared drum or separate supports?CI PRESSSTACK PRESSCOMMONDRUMONE SHARED IMPRESSION DRUMONE SUPPORT PER PRINT UNITMaterial travelSimplified units; not shown to scale.
Layout illustration. Printing units are simplified and not shown to scale.

When to evaluate CI first

Start with CI when thin film stretches easily and the printed colors must line up closely. Test your material and artwork on the proposed machine.

When to evaluate stack first

For bag printing with simpler graphics, compare a stack press against your required quality, output and budget. For two-sided work, check the proposed printing route.

01 / INTERACTIVE COMPARISON

Find the differences that affect your production.

Select a factor to see how the layouts differ and what to check before asking for a quotation.

Hover or click a factor below

Labeled CI and stack printing contact diagram: impression support, plate cylinder, anilox and webHow the material meets each printing plate.Both layouts print where the web passes between the plate and its support.CI PRESSSTACK PRESSCOMMONDRUMOne drum supports all color stationsEach station has its own supportPrintcontactImpression drum / rollerPlate cylinderAnilox roller (ink metering)Web (roll-fed material)ILLUSTRATIVE UNITS · COLOR COUNT AND DIMENSIONS VARY BY PRESS
Layout comparison only. Color count and dimensions depend on the press.

01 / 07

What is the structural difference?

A web is a continuous roll of film, paper or fabric. The main difference is how the press supports it while each color is printed.

CI PRESS

One shared impression drum

CI means central impression. The material stays against a shared drum as it passes the color stations. This helps limit movement between colors.

STACK PRESS

A separate support at each station

The printing units are arranged vertically. Each has its own impression roller, which supports the material against the printing plate.

WHAT TO CHECK

  • The material path and access to each printing unit
  • The drive system, tension controls and drying equipment included

CI and stack describe the layout. The drive system and automatic features are separate parts of the equipment specification.

Selection principleUse the same material, artwork, print-quality target and equipment scope when comparing quotations and print trials.

Which layout fits your printing jobs?

Share your material, artwork and output target to discuss a suitable CI or stack press.

Discuss CI vs Stack

02 / SIDE-BY-SIDE

CI vs stack at a glance

Use the overview to narrow your choices. The final comparison should use the machines and equipment actually offered.

Decision factorCI flexo pressStack-type flexo press
Basic structureColor stations share one central impression drum.Printing units are stacked vertically, each with its own impression roller.
Material handlingShared support is useful when film stretches easily. Test the actual material.Tension controls must keep the material stable between separate printing units.
Color alignmentShared drum support helps limit movement between colors.Alignment depends on tension control, station synchronization and adjustment.
Usable outputCompare print quality, drying and roll handling at the required running speed.Use the same job; distinguish usable printing speed from mechanical speed.
Printing both sidesThe common-drum section normally prints one face; a second face needs an agreed production route.Selected configurations can print both faces; check the colors per side and number of passes.
Job changesCheck tool changes, ink-system cleaning and access around the common drum.Check tool changes, ink-system cleaning and access to upper printing units.
Total investmentInclude the press, options, installation and operating costs.Compare the same equipment scope, quality target and operating costs.

03 / START WITH YOUR JOBS

Which situation looks like your business?

FILM PACKAGING

Fine multicolor printing on film that stretches easily

Your customer needs colors to line up closely across the roll. Use the thinnest or most difficult material you expect to print in the trial.

Start with a CI proposal, then check it with a print trial.

BAG PRINTING

Simpler bag graphics and a defined budget

You know the required quality, width and colors. Check whether a stack press meets those jobs within your budget, including the required dryers and roll handling.

Compare a stack proposal using the same quality and usable-output targets.

MIXED OR TWO-SIDED JOBS

Several materials, frequent changes or two print faces

List the colors needed on each face and your common job changes. Include the print repeat length—the length of one repeated design along the material.

Ask for both layouts when the best production route is unclear.

Match the press to your material.

Tell us what you print and the quality you need. We can discuss the equipment to include in your proposal.

Ask for a Press Recommendation

04 / EXPLORE RAZP PRESSES

Explore CI and stack presses for your printing jobs.

Browse the product families, then discuss the material, print width, colors, ink and roll handling needed for your orders.

CI flexographic presses — RAZP product image
RAZP product image. Example configuration; images are not shown to the same scale.

05 / GET A CONFIGURATION PROPOSAL

Tell us what you need to print.

Send your material details, sample artwork and production target. RAZP can discuss a suitable CI or stack press and the equipment to include in your quotation.

Request a press configuration
  • 01Material type & thickness
  • 02Roll width & printed area width
  • 03Colors per side & design repeat length
  • 04Ink type & sample artwork
  • 05Typical order length & usable output target
  • 06Roll size, site conditions & budget

06 / BUYER QUESTIONS

Questions before you shortlist a press

Is CI always better than a stack flexo press?

No. CI is worth considering for film that stretches easily and jobs that need close color alignment. A suitable stack press may meet other printing and budget needs. Compare the actual machines with your material and artwork.

Can a stack flexo press print plastic film?

Yes, if the machine is equipped for your film. Check material type and thickness, tension control, drying and color alignment during a print trial. Film suitability is specific to the machine offered.

Does CI mean gearless or full servo?

No. CI describes the shared-drum layout. Gearless or full-servo describes the drive system. Ask which drive and automatic controls are included in the quotation.

Which layout is better for two-sided printing?

Some stack presses can be equipped to print both sides. A CI-based line may need an added printing section or another pass. State the colors needed on each face and ask the supplier to show the proposed production route.

Should I compare presses by maximum speed?

Use maximum speed as one reference, then compare usable printed meters, drying, setup waste and roll-change time on the same job. Mechanical speed does not prove the press can print your job acceptably at that speed.

What should I send for a CI vs stack recommendation?

Send the material type and thickness, roll and print widths, colors per side, design repeat length, ink and artwork. Include typical order lengths, output needs, roll diameters, factory utilities and budget.

Have a question before choosing a press?

Ask about materials, print quality or the differences between the configurations you are considering.

Ask a Selection Question
Technical references & product information

The illustrations explain the buying questions. Use the supplier’s machine drawing, current quotation and print trial to check the final equipment and performance.